What do you do if you don’t have the space for a full install system… but you still want a full install system? You could modify the wall, of course (which could mean big time and money); you could compromise on the speaker you put in the cavity (which would mean inferior sound); or you could go for this slimline in-wall model.
The P4-W65 is just 63mm deep, so it will fit into ridiculously tight spaces with the same ease that you’d expect from a Dynaudio Custom speaker.
Like all of our other speakers it uses a 28mm coated soft-dome tweeter and a Magnesium Silicate Polymer woofer (a 6.5in version, in this case). And it’s all housed in a one-piece chassis that secures into place with the turn of a few screws.
You can fine-tune the tweeter’s response to -3dB, 0dB or +3dB to really tailor the speaker to the room. And, for the finishing touch, the included magnetic grill is paintable – so it can be colored to fit seamlessly with the rest of the room’s décor.
Specifications:
| Type: | 2-way in-wall |
|---|
| Drivers: | Tweeter: 28 mm (1 in) |
|---|
| | Mid/bass: 165 mm (6 1⁄2 in) |
|---|
| Frequency response (+/- 3 dB): | 46 Hz–20 kHz |
|---|
| Impedance (nominal/minimum): | 8 Ω /5 Ω |
|---|
| Sensitivity (dB SPL [2.83 V/1 m]): | 87.5 dB |
|---|
| Continuous power: | 40 W |
|---|
| Long term power: | 80 W |
|---|
| Tweeter level options: | -3 dB, 0 dB, +3 dB |
|---|
| Dimensions (W x H x D): | 198 x 296 mm x 63 mm |
|---|
| | 7 3/4 in x 11 11/16 in x 2 1⁄2 in |
|---|
| Cut-out dimensions: | 175 x 275 mm |
|---|
| | 6 7⁄8 x 10 7⁄8 in |
|---|
